Tevo – Menzerna Heavy Cut Compound 1000

Menzerna Heavy Cut Compound 1000 (HCC 1000) is a highly effective sanding polish for automotive clear coats. HCC 1000 removes overspray, severe signs of use and sanding marks effectively and reliably.

How to Use:
1. Clean surface thoroughly prior to polishing.
2. Shake the bottle prior to use and apply the following quantity of the product onto the
polishing pad.
Recommendation for a 40cm x 40cm area:
Pad with a diameter of 95mm: 3-4 pea-sized drops
Pad with a diameter of 150mm: 5 pea-sized drops
Pad with a diameter of 180mm: 6-7 pea-sized drops
3. Use the Menzerna Heavy Cut Foam Pad in the event of heavy signs of use.
4. Use either a rotary or an orbital polishing machine and use the cross-coating method.
Apply strong, even pressure while polishing and extend the product with a constant low machine speed.
5. At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.
6. Once you have finished polishing, remove any residue with our Premium Microfiber cloth, without applying any pressure.
7. Any signs of sanding marks and use have now been removed. For an exceptionally glossy finish, now apply one of our Menzerna Medium Cut Polishes and of our Menzerna Finishes.

Product Benefits:
1. minimal usage
2. user friendly
3. lesser polishing residue.
4. best to remove overspray.

Products Specification: 1 Litre, paste type.

Menzerna重切削复合物1000（HCC 1000）是专为汽车透明面漆设计的高效砂磨抛光剂。HCC 1000能有效可靠地去除喷漆飘粉、严重使用痕迹和砂磨痕迹。

使用方法：
1. 在抛光之前彻底清洁表面。
2. 使用前摇匀瓶子，根据以下建议量将产品涂抹在抛光盘上。
建议用于40厘米 x 40厘米区域：
直径95毫米的盘子：3-4颗豌豆大小的涂抹
直径150毫米的盘子：5颗豌豆大小的涂抹
直径180毫米的盘子：6-7颗豌豆大小的涂抹
3. 如果有严重使用痕迹，使用Menzerna重切泡沫盘。
4. 使用旋转式或偏心式抛光机，并采用交叉涂覆方法。在抛光时施加均匀而强劲的压力，以恒定低速运行产品。
5. 初始时，抛光剂可能会显得有些乳白色，需继续工作，直到只剩下略透明/油膜可见。
6. 完成抛光后，用我们的优质微纤维布擦拭去除任何残留物，不需要施加压力。
7. 现在所有的砂磨痕迹和使用痕迹都已经被去除。为了获得异常光泽的表面，现在可以使用我们的Menzerna中等切割抛光剂和抛光剂之一。

产品优势：
1. 使用量最少
2. 用户友好
3. 抛光残留物更少
4. 最适合去除喷漆飘粉

产品规格：1升，膏状。